Cat6 U/UTP Outdoor LAN Cable 23 AWG

Data sheet

Outer sheath colour	Black
Category	Cat6
Cable Jacket	UV-resistant PE compound
Conductor Material	Copper
Data Rate - Bandwidth	1Gbps (1000Base-T)
Wire Gauge (AWG)	23AWG Bare Copper
Max Transmission Distance	100m
Shielding Type	U/UTP

More info

Category 6 U/UTP 100 Ohm PE Outdoor LAN Installation Cables

ON-210010 data cable consists of 100 Ohm impedance, 4-pair and 8-pair U/UTP wires jacketed with heavy-duty,black, UV-resistant PE compound for horizontal outdoor implementations in local area networks (LANs).

The cable fully conforms with and provide a substantial margin above all Category 6 requirements of ANSI/TIA-568.2-D and IEC 61156-5. This cable fully supports IEEE 802.3at 2009 Part 3 Amendment 3 including PoE+

ON-210010 series data cables are tested and verified for full compliance with the following standards:
Category 6 according to ANSI/TIA-568.2-D Category 6 according to IEC 61156-5 (for ISO/IEC-11801 2nd Edition) 250 MHz according to CENELEC EN 50288-5

PHYSICAL AND MECHANICAL SPECS

Basic Conductor :	Solid, 23AWG bare annealed copper
Insulation :	Polyolefin .
Number of insulated conductors :	8, twisted in 4 pairs. (8 pairs in FIG-8 cables)
Color Code of Pairs :	Blue x White/Blue, Orange x White/Orange, Green x White/Green, Brown x White/Brown.
Overall Tape Wrap :	None.
Overall shield :	None.
Drain wire :	None.
Inner Jacket :	LS0H Compound.
Inner Jacket Colour :	Grey RAL 7035.
Outer Jacket :	Heavy-duty, black, UV-resistant PE compound for outdoor use.
Outer Jacket Colour :	Black RAL 9005.
Standard Surface Marking :	Includes ONET Cabling P/N, cable description, Meter mark and Batch Number.
Pulling force :	50 N/mm² max.
Short Term Bend Radius :	8xOD mm
Long Term Bend Radius :	4xOD mm
Storage Temperature :	-20 to +80C
Temperature operating range :	-20 to +60C
Installation temperature range :	0 to +50C
Flame Test :	IEC 60332-1
Conductor Size	UL 444.
Halogen content in LS0H cables	Null.

TRANSMISSION SPECS

FREQ.	Insertion Loss			NEXT			PS NEXT			EL FEXT			PS EL FEXT			RL			TCL	EL-TCTL
MHz	dB/100m			dB			dB			dB/100m			dB/100m			dB			dB	dB
	Max	Nom	Std	Min	Nom	Std	Min	Nom	Std	Min	Nom	Std	Min	Nom	Std	Min	Nom	Std	Min	Min
1.00	2.0	1.65	2.0	77.3	84.3	74.3	75.3	82.3	72.3	70.8	80	67.8	68.8	77	64.8	20.0	25	20.0	40	35
10.00	5.9	5.6	6.0	61.3	69.3	59.3	60.3	67.3	57.3	50.8	65	47.8	48.8	62	44.8	26.0	30	25.0	40	15
25.00	9.4	9.0	9.5	56.3	63.3	53.3	54.3	61.3	51.3	42.8	57	39.8	40.8	54	36.8	25.3	30	24.3	36	7.0
31.25	10.6	10.2	10.7	54.9	61.9	51.9	52.9	59.9	49.9	40.9	53	37.9	38.9	50	34.9	24.6	28	23.6	35.1	5.5
62.50	15.2	14.9	15.4	50.4	57.4	47.4	48.4	55.4	45.4	34.9	45	31.9	32.9	43	28.9	22.5	27	21.5	32	NS
100.00	19.6	19.2	19.8	47.3	54.3	44.3	45.3	52.3	42.3	30.8	43	27.8	28.8	40	24.8	21.1	26	20.1	30	NS
200.00	28.7	27.5	29.0	42.8	49.8	39.8	40.8	47.8	37.8	24.8	40	21.8	22.8	37	18.8	19.0	25	18.0	27	NS
250.00	32.6	31.0	32.8	41.3	48.3	38.3	39.3	46.3	36.3	22.8	37	19.8	20.8	34	16.8	18.3	25	17.3	26	NS

ELECTRICAL SPECS

Characteristic Impedance	100±6 Ohm @ 1-250 MHz
DC Resistance	93.0 Ohm/Km max.
Resistance unbalance	2% max.
Capacitance	45 pF/m nom. @ 1 KHz
Cap. Unbalance (wire to ground)	1500 pF/Km max. @ 1 KHz.
Voltage rating	72 Vdc max.
Dielectric strength	1500 Volts/1 minute min rms
Velocity of Propagation (NVP)	67-69%
Propagation Delay	514 + 36/f½ nS/100m max @ 1-300 MHz
Propagation Delay Skew	35 nS/100m max @ 1-300 MHz
Insulation Resistance	5000 MegaOhm•Km min. @ 500 Vdc
Coupling attenuation	40 dB min @ 30-100 MHz 40-20Log(f/100) @100-300 MHz
Transfer Impedance	N/A