View larger
ON-PCD-M41301
ON-PCD-M41301
New product
SC/UPC to LC/UPC MM Duplex OM4 50/125μ 3mm LSZH Patch Cord 1m
Data sheet
| Fiber Category | OM4 |
| Fiber Type | Multi mode |
| Type of Connector 1 | SC/UPC |
| Type of Connector 2 | LC/UPC |
| Cable Length | 1m |
| Cable Type | Duplex |
| Outer sheath colour | Violet |
| Outer diameter per core | 3mm |
| Cable jacket material | LSZH (Low Smoke Zero Halogen) |
| Strength member | Aramid Yarn |
| Insertion Loss | Less than 0.3dB |
| Return Loss | Greater than 26dB |
| Attenuation Level | ≤ 2.3dB @ 850nm , ≤ 0.6dB @ 1300nm |
| Operating temperature | -20℃ ~ +60℃ |
| EMB | ≥4700MHz.km @ 850nm |
More info
SC-LC MM Duplex OM4 50/125μ 3mm LSZH Patch Cord 1m
OM4 multimode patch cords are used to connect high speed and legacy networks like 10 / 40 / 100 gigabit ethernet.
They provide interconnect and cross-connect of applications in entrance facilities, telecommunications rooms, data centers, at the desk and network applications to interconnect pre-terminated cassettes in main distribution, horizontal distribution, and equipment distribution areas.
These OM4 patch cords are manufactured for internal applications using LSZH cables which conform to IEC, EIA TIA or Telcordia standards.
Our high quality, violet colored OM4 patch cords with 3.0mm thick outer diameter are terminated with optimized ceramic ferrule connectors which gives optimum optical performance. They are manufactured from the highest quality 900µm buffer/jacket optical fibre.
OM4 fiber optic patch cables are assembled to meet and exceed industry performance standards. Each patchcord is individually tested to make sure you receive the highest possible quality, and the results of each test are included with the product.